600mm Non-Metal sheet Taping
head w/ CCCS control system
Main Specification
7.1.)
Type: Tangential eccentric type helical taping
with two pads per head. 7.2.) Application: For Mylar, Polyester, and other
non-metal sheets. 7.3.) Tape dimension: 600mm/OD X 75/ID X 20-60mm/W 7.4.)
Max. cable diameter: 110mm Max. 7.5.) Taping speed: 600rpm Max. 7.6.)
Tension control: Hysteresis type 7.7.) Synchronization control: CCCS
system 7.8.) Driving system: AC motor with Vector type Inverter
8.] Machine Composition:
8.1.)
600mm taping head.....................................................
2heads 8.2.) Synchronization control
..................................................... 1set 8.3.)
Hysteresis tension control
.................................................. 1set 8.4.) Base and
safety cover......................................................... 1set
8.5.) Control
panel......................................................................
1set 8.6.) CCCS operation/control
system......................................... 1set 8.7.) AC Driving
motor .............................................................. 1set
9.] Detail of machine
specifications:
9.1.) Tape
dimension: 600mm/OD X 75mm/ID X 20-60mm /W 9.2.) Taping pads: Tangential
eccentric type helical taping 9.3.) Tape thickness: General purpose such
as PE tape, textile tape and etc… 9.4.) Tape tension control:
9.4.1.)
Type: Hysteresis type tension control 9.4.2.) Tension force: Kg 9.4.3.)
Control system: Output tension proportion to the diameter of the tape
automatically.
9.5.) Taping
Pitch:
9.5.1.)
Auto mode: Pitch is adjusted automatically by the parameters , such as the
diameter of the cable, tape width, and overlapping ratio which operators
keyin to CCCS system.
9.5.2.)
Manual mode: Pitch is adjusted by the operators setting from the knobs on
the control panel. 9.6.) Taping direction: Helical taping, S & Z
directions. 9.7.) Guide dies: 9.7.1.) Inlet side of each taping complete
with a # type guide roller.
PAN-PIONEER Co., Ltd.
民鋒股份有限公司
9.7.2.)
In front and rear position of taping tube complete with guide dies.
9.7.3.) On the end of taping tube, a support stand to be fitted . 9.8.)
Automatic stop device: 9.8.1.) Tape broken detectors:
Type:
Pulse detecting type. 9.8.2.) Incase of counter length reached. 9.8.3.)
Incase of safety cover has been opened attached.
9.9.)
Brake: Pneumatic disk type, to be fitted on the gear box. 9.10.) Safety
cover: 9.10.1.) Type: Left-right sliding type with rails on the bed.
9.10.2.) There are two plastic glass windows on the front side. 9.10.3.) A
fluorescent lamp is inside for illumination. 9.11.) Machine bed:
Metal/Non-metal tape using same machine bed, that enable exchange
of
taping head location. 9.12.) Transmission: HP AC motor > Timing belt
> Taping head 9.13.) Electric operation panel:
9.13.1.)
Power source control 9.13.2.) Current/Voltage meters 9.13.3.) AC motor
operation panel 9.13.4.) Tape tension indicator 9.13.5.) Tape pitch
control 9.13.6.) Taping speed indicator 9.13.7.) Tape broken detector
9.13.8.) CCCS control system
10.] Operation direction:
Right hand ( from right to left ).
PAN-PIONEER Co., Ltd.
民鋒股份有限公司
600mm Metal sheet Taping head w/ CCCS control system
11.] Main Specification
11.1.)
Type: Tangential eccentric type helical taping with two pads per head.
11.2.) Application: For Copper, Aluminium, and steel tape. 11.3.) Tape
dimension: 600mm/OD X 75/ID X 20-60mm/W 11.4.) Max. cable diameter: 110mm
Max. 11.5.) Taping speed: 350 rpm Max. 11.6.) Tension control: Hysteresis
type 11.7.) Synchronization control: CCCS system 11.8.) Driving system: AC
motor with Vector type Inverter
12.] Machine Composition:
12.1.)
600mm taping head...................................................
2heads 12.2.) Synchronization control
................................................... 1set 12.3.) Hysteresis
tension control ................................................ 1set
12.4.) Base and safety
cover....................................................... 1set 12.5.)
Control
panel....................................................................
1set 12.6.) CCCS operation/control
system....................................... 1set 12.7.) AC Driving motor
............................................................ 1set
13.] Detail of machine
specifications:
13.1.) Tape
dimension: 600mm/OD X 75mm/ID X 20-60mm /W 13.2.) Taping pads: Tangential
eccentric type helical taping 13.3.) Tape thickness: General purpose such
as copper tape, steel tape and etc… 13.4.) Tape tension control:
13.4.1.)
Type: Hysteresis type tension control 13.4.2.) Tension force: Kg 13.4.3.)
Control system: Output tension proportion to the diameter of the tape
automatically.
13.5.) Taping Pitch:
13.5.1.)
Auto mode: Pitch is adjusted automatically by the parameters , such as the
diameter of the cable, tape width, and overlapping ratio which operators
keyin to CCCS system.
13.5.2.)
Manual mode: Pitch is adjusted by the operators setting from the knobs on
the control panel. 13.6.) Taping direction: Helical taping, S & Z
directions.
13.7.)
Guide dies: 13.7.1.) Inlet side of each taping complete with a # type
guide roller. 13.7.2.) In front and rear position of taping tube complete
with guide dies.
PAN-PIONEER Co., Ltd.
民鋒股份有限公司
13.7.3.)
On the end of taping tube, a support stand to be fitted . 13.8.) Automatic
stop device: 13.8.1.) Tape broken detectors:
Type:
Pulse detecting type. 13.8.2.) Incase of counter length reached. 13.8.3.)
Incase of safety cover has been opened attached.
13.9.)
Brake: Pneumatic disk type, to be fitted on the gear box. 13.10.) Safety
cover: 13.10.1.) Type: Left-right sliding type with rails on the bed.
13.10.2.) There are two plastic glass windows on the front side. 13.10.3.)
A fluorescent lamp is inside for illumination. 13.11.) Machine bed:
Metal/Non-metal tape using same machine bed, that enable exchange
of
taping head location. 13.12.) Transmission: HP AC motor > Timing belt
> Taping head 13.13.) Electric operation panel:
13.13.1.)
Power source control 13.13.2.) Current/Voltage meters 13.13.3.) AC motor
operation panel 13.13.4.) Tape tension indicator 13.13.5.) Tape pitch
control 13.13.6.) Taping speed indicator 13.13.7.) Tape broken detector
13.13.8.) CCCS control system |